For the quilts you make
Quilting calculators.
Clarity before you cut.
Free fabric maths for backing, binding, borders and quilt tops. Get the yardage, see the layout, and keep your cutting plan.
Your measurements
Quilt backing calculator · Selvedge & Sage
Fabric to buy
5 yd
2 panels · vertical seams
Rounded up to ⅛ yard. Before shop rounding: 4.889 yd.
- Required backing
- 68 in × 88 in
- Panels off the bolt
- 2 × 88 in long
- Each panel across the bolt
- 34.5 in
- Total seam take-up
- 1 in
- Calculated cut length
- 176 in · 4.889 yd
- Separate repeat reserve
- 0 in
- Added by shop rounding
- 4 in
Compare layouts
- Cut 2 full-width lengths, each 88 in along the bolt. From each, cut a panel 34.5 in across the bolt × 88 in along it.
- Join the 2 panels with a 0.5 in seam allowance on each piece. Each join takes up 1 in across the assembled back. Press seams open.
- Before final trimming, the assembled back measures 68 in × 88 in. The backing target is 68 in × 88 in.
- Centre the quilt and check coverage, then trim the assembled back to 68 in × 88 in.
Cut lengths total 176 in off the bolt. Shop rounding adds 4 in. That rounding is not a planned shrinkage or squaring allowance.
No automatic prewash shrinkage, squaring or crosswise motif matching. Measure usable width after any washing. Check your quilting service’s overhang and seam requirements.
Start here, then keep your plan
Use the backing calculator above for a quick fabric check. The dedicated backing page explains its panel maths, assumptions and limits. Choose another tool for binding, borders, block fabric or diagonal backing.
Copy the shopping list, save measurements in this browser, share your chosen layout, or download a cutting-plan PDF. The guides below walk through the decisions behind the numbers.
Measurements into fabric
Three illustrated guides
Piece quilt backing from standard-width fabric
Cut and join a plain backing from ordinary quilting cotton.
Read the guide →Directional quilt backing: choose the layout before cutting
Keep a one-way print facing the intended direction without guessing yardage.
Read the guide →Measure quilt borders and turn strip lengths into fabric
Measure an unfinished top, cut straight borders and buy the correct yardage.
Read the guide →